Aluminum Electrolytic Capacitor
-
KFH / Long life aluminum electrolytic capacitor of Screw Terminal Type
Long life 5000 hours, 105℃
-
KFT / Standard aluminum electrolytic capacitor of Screw Terminal Type
Standard type with temperature 105℃, life 2000 hours.
-
KVLD / Super Large Size / Aluminum Electrolytic Capacitor of V-chip Type
1. Reflow soldering is available, available for high density surface mounting.
2. Lifetime: 105℃,2000 hours, AEC-Q200 Compliance.
-
KVTD / Large Size / Aluminum Electrolytic Capacitor of V-chip Type
1. Reflow soldering is available, available for high density surface mounting.
2. Lifetime: 105℃,2000 hours, High stability and reliability.
-
KVTG / High voltage / Aluminum Electrolytic Capacitor of V-chip Type
1. Small size, Large capacity 105℃ 3000~5000 hours
2. High stability and reliability with high ripple current
-
KVZ2 / Aluminum Electrolytic Capacitor of V-chip Type
1.Reflow soldering is available, available for high density surface mounting
2.High stability and reliability, Lower Impedance, Lifetime: +105℃, 2000 Hrs.
-
KVZL / Long Life / Aluminum Electrolytic Capacitor of V-chip Type
KVZL
1. Reflow soldering is available, available for high density surface mounting
2. High stability and reliability, Lower Impedance, Lifetime: +105℃ 5000 Hrs.
-
KB05 / Non-Polarized Low Loss 105℃/ Axial Or Round Audio Aluminum Electrolytic Capacitor
1. Capacitance: 1μF ~ 150μF
2. MAX Dissipation Factor: MAX 5% at 120Hz
3. Low loss, high quality, tinned PC wire.
4. Used for frequency divider, tweeter, midrange horn, power amplifier coupling, etc.
-
KB12 / Non-Polarized Miniaturized 105℃/ Axial Or Round Audio Aluminum Electrolytic Capacitor
1. Capacitance: 1μF ~ 600μF
2. MAX Dissipation Factor: MAX 12% at 1KHz
3. Miniaturized size, low loss, high quality, tinned PC wire
4. Used for frequency divider, tweeter, midrange horn, power amplifier coupling, etc.
-
KB10 / Non-Polarized Standard 105℃/ Axial Or Round Audio Aluminum Electrolytic Capacitor
1. Capacitance: 1μF ~ 470μF
2. MAX Dissipation Factor: MAX 10% at 1KHz
3. Low loss, high quality, tinned PC wire.
4. Used for frequency divider, tweeter, midrange horn, power amplifier coupling, etc.